MF SERIES SKID
completely bolted type skid
The MF Series skid is a completely bolted type skid. The skid frames are manufactured using stainless steel 316 material and painted or powder coated. Fasteners are stainless steel 316 and self-locking type. The skid is suitable for foam tank sizes ranging from 60gallons to 170gallons. The skid is designed for 4-point lifting and is load tested. Additional inductors are supplied for projects with hose reel requirement and the skid can accommodate up to 2 additional hose reel inductors.
MS SERIES SKID
a welded type skid
The MS Series is a welded type skid. The skid frames are manufactured using mild steel square tubes (optional: stainless steel 316). The skid is suitable for foam tank sizes ranging from 200gallons to 650gallons. The skid is designed for 4-point lifting. Skids are load tested.
ML SERIES SKID
a totally enclosed skid
The ML series is a totally enclosed skid which is of the completely welded type. The skid frames are manufactured using mild steel square tubes (optional: stainless steel 316). The skid has been analyzed and designed based on DNVGL-ST-E271 2.7-1. The grade of all the materials including pad eye plate used for the skid are considered as S275J2. The skid is insulated using suitable insulation. The skid is suitable for foam tank sizes ranging from 60gallons to 650gallons. The skid is designed for 4-point lifting and is load tested. These skids are specially built for installations in low temperature climate conditions. Skid is suitable for -4°F (-20°C).
UMF SERIES SKID
BOLTED TYPE SKID
The UMF Series are of bolted construction and designed and load tested for 4-point lifting. The skid frames are manufactured from SS-316 material and then ‘off-shore’ protected with either a painted or powder coat finish. Fasteners are also of SS-316 and are of the self-locking type. These skids are suitable for foam tank sizes ranging from 60 to 170 US Gallons and are designed to also accommodate up to 2 additional inductors for the connection of hose reels when so required. This series of skids are USCG Certified.
UMS SERIES SKID
WELDED TYPE SKID
The UMS Series are of welded construction and designed and load tested for 4-point lifting. The skid frames are manufactured using mild steel square tubes (optional: SS-316) and then ‘off-shore’ protected with either a painted or powder coat finish. These skids are suitable for foam tank sizes of 200, 250 and 300 US Gallons. Certified for either Inline Inductor or Water Motor Foam Pump (Turbine Proportioner), these skids are also fitted with an additional inductor, for the option of either one or two independent hose reel stations. This series of skids are USCG Certified.
accordance with ASME Section VIII
The Foam Bladder tank is supplied for projects with bladder tank requirement, the bladder tanks are manufactured in accordance with ASME Section VIII, Div. 1 and are internally coal tar epoxy coated and Red enamel coated for exterior of the skid. Tank is provided with level gauge; hydraulic operated foam concentrate valves. All fasteners and isolation valves are SS-316. UL listed ratio controllers are used for DIFF and hose reel station connection. Third party certification such as ABS, DNVGL or any other classification society based on project requirement.
“Solberg Foam Bladder tank, Ratio Controllers and Marsol DiFFS Nozzles are UL listed with Solberg ARCTIC™ 3% MIL-SPEC AFFF and RE‑HEALING™ RF3, 3% FOAM CONCENTRATE”
Key features of the Skids
- Rugged Design
- 4 Point Lifting
- Easy Maintenance
- SS-316 Foam Tank
- Built in Foam Filling Pump
- Liquid Level Indicator (LLI)
- Foam Inductor or Water Motor Foam Pump
- Deluge Valve or Motor Operated Butterfly Valve
- Painting and Coating to Offshore Standards
- USCG (UMS and UMF Series)
- Super Duplex / Copper Nickel / Titanium Piping
- Super Duplex / Titanium Valve
- Level Gauge
- Hazardous Areas Electricals
- Pressure Test (Pipe Line)
- Material Certificates
- Certificate of Conformity
- FAT Certificate